PLF

The fat-melting machine with the independent heating PLF is designed for the plastification of hard blocks (fat, butter, chocolate glaze) and their maintenance at the desired temperature for the further use in the technology process.

The machine is the heated tank, which is divided by the horizontal tube sheet into two parts: - feed chamber (upper) and bath (underside). The machine has two heating circuits, the first circuit – melting sheet, the second circuit – heating of collection bath. The collection bath is the half of the horizontal placed cylinder with its transition into a rectangular shape in the top of the bath. On the outer side of the bath is installed a heat exchanger for heating and maintaining the temperature of the product. The collection bath, which has the rectangular shape, is located in the upper part of the machine, above the melting grid. The chamber is insulated with heat-insulating material and has a thermal insulation of the cover, which opens downward and is used as a receiving table.

The machine is equipped with two heating units for two circuits, for the separate heating of the melting grid and bath; control box, which automatically regulate the desired temperature in the heating circuits.

The machine is made completely of stainless steel AISI 304.

Short technical specification:

  • The maximum recommended temperature 
    for the providing of the tube sheet 
    for the providing of the technology process:
+70 - + 75°С.
  • The maximum recommended temperature
    of the heat transfer medium for the bath:
 + 55°С.
  • Outing flange for product unloading
DN65

Usage condition:

  • heated space
15-35°С,
  • humidity
75%.